THE OPERATION INTRODUCTION ON ACCESS LEVEL MODIFICATION.OF INVERTER

THE OPERATION INTRODUCTION ON ACCESS LEVEL MODIFICATION.


please find below for the introduction on how to change the access level. the status is factory default before modification. the value of
constant a l-0 2 ' constant access level is 2 . please operate as follows to change a l-02 to be 3 (normal setting) .
operation frequency ref =0.00hz press menu key to go to mode
selection status. press up key to display the next mode . press
data enter key to enter constant display status of environment sett-
ing mode. press up key to change the current constant a l-00 to a l-0 l . press data enter key to set a l-0 l . press up key to change it to be the constant value description : the " 2 " in a l-0 l (#2===)is the set
value.quick start " is the name of setting value "2" .press data enter key to confirm the modification . modification is over' the data is up-
dating . automatically return to the constant displaying status of enfir-
onment setting mode.