inverter,s the constant in the grey place only exits in v c.

the constant in the grey place only exits in   v c.

frequency reference
monitoring and setting of frequency reference value.
the display units can be set with user constant o1-03
output frequency
monitors the output frequency the display units can be set with user constant o1-03


output current
monitors the output current 10 v : rated current(0 to + 10 volts output)
control method
shows which control mode is set can not be output
motor speed
monitors the motor speed. the display unit setting   
can be changed by o 1 - 03 output signal levels for
function analog outputs 10 volts : max . frequency  
(0 to _+  volts possible ) and min unit is 0.01 hz     
and valid access levels v/f is x v/f w/pg is q and      
open loop vector is q and flux vector is q.              

output voltage.
monitors the inverters  internal output voltage refer
ence value.output signal levels for function analog  
outputs 10 voltage :ac 200 v (ac 400)(0-+10 v     
output)and min unit is 1v and v/f is q and v/f w/pg 
is q and open loop vector is q and flux vector is q.